Polymer Machining

Laser Micromachining Polymer Machining (Polyimide (Kapton), PEEK, PET (Mylar), Polycarbonate and others)

Changing a work surface with light

  • Laser Micromachining of Kapton tubing

    Polymer Machining –  Kapton tubing

    Type of polymer being micromachined and its absorption spectrum are critical in determining the optimal laser source to use.

  • Typically, matching the low transmission point of a given material to the corresponding laser wavelength yields the most favorable results.
  • UV Lasers produce “cooler” excitation in polymers which results in an extremely clean cut quality with a minimal Heat Affected Zone (HAZ)
  • Key considerations when choosing the appropriate laser source include, desired cut quality, feature size and throughput.
  • There is a wide spectrum of process parameters that can be optimized in order to meet quality and cost targets.  For example, shorter laser pulses can improve cut quality and reduce the Heat Affected Zone.
  • The smallest feature size achievable with a UV laser source is about 1 micron.
  • Precision Fabrication of Wells.

    Polymer Machining  – Precision Fabrication of Wells.

    Potomac stocks many types of polymers in Dupont Kapton (polyimide), Mylar (PET), PEEK, Polycarbonate and others,

  • Potomac has almost every laser wavelength in-house, including UV systems at 193nm, 248nm and 355nm.
  • Potomac can offer expedited Polymer Machining services with turnaround times as quick as 24-48 hours.